Merge pull request #2075 from xidameng/master

Create Setup301_BW16_ST7735.h for BW16-based Boards

User_Setup_Select.h

@@ -128,6 +128,8 @@
 
 //#include <User_Setups/Setup205_ESP32_TouchDown_S3.h>     // Setup file for the ESP32 TouchDown S3 based on ILI9488 480 x 320 TFT 
 
+//#include <User_Setups/Setup301_BW16_ST7735.h>            // Setup file for Bw16-based boards with ST7735 160 x 80 TFT
+
 //#include <User_Setups/SetupX_Template.h>     // Template file for a setup
 
 

User_Setups/Setup301_BW16_ST7735.h

+#include "itoa.h"
+#include <avr/dtostrf.h>
+
+
+// Setup for BW16 and ST7735 80 x 160 TFT
+#define USER_SETUP_ID 301
+// See SetupX_Template.h for all options available
+
+#define ST7735_DRIVER
+
+
+#define TFT_WIDTH  80
+#define TFT_HEIGHT 160
+
+
+#define ST7735_GREENTAB160x80
+
+// For ST7735, ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
+// Try ONE option at a time to find the correct colour order for your display
+
+//  #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+//  #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// Pin Mappings for BW16 board
+#define TFT_MISO 11
+#define TFT_MOSI 12
+#define TFT_SCLK 10
+#define TFT_CS    9  // Chip select control pin
+#define TFT_DC    8  // Data Command control pin
+#define TFT_RST   6  // Reset pin (could connect to RST pin)
+
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+
+#define SPI_FREQUENCY  20000000
+//#define SPI_FREQUENCY  27000000 // Actually sets it to 26.67MHz = 80/3
+