Add user setup file for LilyGo T-Display RP2040

User_Setup_Select.h

@@ -97,6 +97,7 @@
 //#include <User_Setups/Setup135_ST7789.h>           // Setup file for ESP8266 and ST7789 135 x 240 TFT
 
 //#include <User_Setups/Setup136_LilyGo_TTV.h>       // Setup file for ESP32 and Lilygo TTV ST7789 SPI bus TFT  135x240
+//#include <User_Setups/Setup137_LilyGo_TDisplay_RP2040.h>  // Setup file for Lilygo T-Display RP2040 (ST7789 on SPI bus with 135x240 TFT)
 
 //#include <User_Setups/Setup200_GC9A01.h>           // Setup file for ESP32 and GC9A01 240 x 240 TFT
 

User_Setups/Setup137_LilyGo_TDisplay_RP2040.h

+// LilyGo T-Display RP2040 (ST7789 135 x 240 display)
+// Warning: Ensure all #define XXX_DRIVER lines in User_Setup.h are commented out!
+
+#define ST7789_DRIVER     // Configure all registers
+
+#define TFT_WIDTH  135
+#define TFT_HEIGHT 240
+
+#define CGRAM_OFFSET      // Library will add offsets required
+
+// For LilyGo T-Display RP2040
+#define TFT_CS   5  // Chip Select pin
+#define TFT_DC   1  // Data Command control pin
+#define TFT_RST  0  // Reset pin
+#define TFT_MOSI 3
+#define TFT_SCLK 2
+// Don't uncomment next line if you want fine control of backlight
+//#define TFT_BL 4
+// LilyGo T-Display RP2040 allows you to use analogWrite on this pin (0=>off, 255=>full brightness)
+#define TFT_ANALOG_BL 4
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+#define SPI_FREQUENCY  40000000
+#define SPI_READ_FREQUENCY  20000000
+#define SPI_TOUCH_FREQUENCY  2500000