GitLab

Added a function to disable dynamic payloads but ACK payloads are also disabled at the same time because they depend on dynamic payloads.

Fix clamping to a single hex digit

Added support for boards using SPIDEV with GPIO identifiers higher than 255

RF24::begin: reset dynamic_payloads_enabled to false

The desired functionality is to display all channel measurements greater than 0xF as 0xF. The current behavior picks the minimum between `0xF` and `(value & 0xF)`, which is just the last hex digit of the measurement.

If the value was `0x12`, the code would print `2` rather than `F`. This change just makes `min` compare `0xF` with the full value of the measurement, such that measurements above `0xF` will always get clamped correctly.

- Add support for Arduino Due secondary SPI BUS using SPI_UART library
(TX1: MOSI, RX1: MISO, SDA1: SCK, CS&CE: User selected)

add static initialization for pthread mutexes

- Change binary to hex
- Assign csDelay value in constructor

fixed output and made it consistent with output from Ardunio version.

There are two main delays in the library:
1. txDelay is called during stopListening. This is important when ESB/AA
is enabled, but can be reduced if AA is disabled or if there is a delay
between calling stopListening() and any writes to the radio
2. csDelay is called every time the CSN/SS SPI pin is toggled to reduce
SPI polling. This can be reduced to 0 if interrupts or timed polling is
taking place.

Minor documentation correction - RF24_CRC_DISABLED

getCRCLength() returns RF24_CRC_DISABLED, not RF24_DISABLED...

Let's PlatformIO decide how to build Arduino v1.0 library

Update PlatformIO library manifest

Fix path to platform specific files in library.json for platformio

Documentation update for makefile improvements etc.

- update for makefile improvements
- python wrapper updates
- cross compilation
- duplications removed
- minor doc fixes

Changes in RF24_config.h prohibits the detection of XMEGA.

Change examples_RPi to examples_linux

Improved Allwinner SoC detection.
Signed-off-by: mz-fuzzy <mzfuzzy800@gmail.com>

#238 #251

Change the RF24_config.h for correct detection of  ATXMega256D3

.gitignore update

Support for ATXMega256D3 as a static library.

Changed ce_pin and csn_pin to uint16_t so the library supports GPIO identifiers higher than 255 (Minnowboard)