GitLab

Further testing after including python wrapper indicates the original
delay seems to be about this best its going to get as far as a
compromise between delaying a bit/throughput and reliability of payloads
when rapidly switching between modes.

Python wrapper for RPi added

This wrapper and the pingpair_dyn example seems to have brought up a bit of a timing issue that should be fixed in the latest commit https://github.com/TMRh20/RF24/commit/d41d47ab20cb794b8250560154076b1b2b06feae  
Also, (minor issue) it seems to be missing the define for ```BCM2835_SPI_CS0``` and ```BCM2835_SPI_CS1``` 
That can be fixed, and it seems to work nicely otherwise, so merging.

Delay is necessary for faster devices in some cases
- reduced delay by 30us for testing further

Further testing indicates this is not needed

- In testing with python wrapper, found setting CE(HIGH) sooner in
startListening() prevents issues
- Changed delay between available() checking on RPi to prevent what
seems like saturation of the RF24 module with SPI requests
- Reduces errors when switching between RX/TX modes

Error from merging of code

- Testing with Arduino & RPi indicates delay needs to be increased
slightly before flushing tx_fifo
- Fix addresses in RPi transfer example, and add stopListening()

- Moved bcm2835.h and .c to RPi folder
- Changed includes and makefile to accommodate

Accidentally copied old RPi examples on last commit (code merge)

Prevent inclusion of BCM2835 driver for non-linux devices

Merged code to simplify everything
- #31 Timing of stopListening() adjusted slightly to further prevent
blank ack-payloads if powering down while using ack-payloads or
switching between modes

character fix

Per #27 update to match http://tmrh20.github.io docs

per req. from sergio m.

- add #define for _SPI
- add links to alternate SPI libs

Fix compile errors when trying to use any of the three libraries
together - should allow softspi and uartspi to play nicely with the std
SPI library now

- Revert SPI to default lib by default. Configure via RF24_config.h #24
- Corrected CRC status reporting per https://github.com/evorios by
checking AA register

- Added softSPI support for https://github.com/greiman/DigitalIO library
- Updated SPI_UART code to allow use at the same time as the SPI library

Uses the SPI_UART library at https://github.com/TMRh20/Sketches

Per a tip from Andrew A. this should be the final nail in the coffin of
issue #7

http://www.airspayce.com/mikem/bcm2835/bcm2835-1.37.tar.gz

- Merge with latest BCM2835 driver changes
- Should allow full support for RPi B+ but is untested

... not sure why the .h file was left out the first time...

http://www.airspayce.com/mikem/bcm2835/bcm2835-1.37.tar.gz

- Merge with latest BCM2835 driver changes
- Should allow full support for RPi B+ but is untested

Choose a standard pin layout for all the examples based on the pin connection table in the readme files.
Different pin layout in the example files could lead to not working examples.

 - Changes in the pin layout table to describe how to connect the NRF24L01 pins to different boards
 - Remove duplicate readme information in the RPi readme file and point to the default RPi/RF24/readme.md file.