ESP8266 printDetails, Docs

- Route printf through serial via Serial.printf
- Remove device specific defines & replace with PRIPSTR define for
string ( use of %s vs %S )
- Per @maribeiro #125
- Updated Doxyfile

Doxyfile

-# Doxyfile 1.8.9
+# Doxyfile 1.8.10
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -38,7 +38,7 @@ PROJECT_NAME           = "Optimized High Speed NRF24L01+ Driver Class Documenati
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         = V1.0
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
@@ -58,7 +58,7 @@ PROJECT_LOGO           =
 # entered, it will be relative to the location where doxygen was started. If
 # left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       = "../../../ArduinoBuilds/RF24 Docs"
+OUTPUT_DIRECTORY       = "../../ArduinoBuilds/RF24 Docs"
 
 # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
 # directories (in 2 levels) under the output directory of each output format and
@@ -354,6 +354,13 @@ IDL_PROPERTY_SUPPORT   = YES
 
 DISTRIBUTE_GROUP_DOC   = NO
 
+# If one adds a struct or class to a group and this option is enabled, then also
+# any nested class or struct is added to the same group. By default this option
+# is disabled and one has to add nested compounds explicitly via \ingroup.
+# The default value is: NO.
+
+GROUP_NESTED_COMPOUNDS = NO
+
 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
 # (for instance a group of public functions) to be put as a subgroup of that
 # type (e.g. under the Public Functions section). Set it to NO to prevent
@@ -766,11 +773,12 @@ WARN_LOGFILE           =
 # The INPUT tag is used to specify the files and/or directories that contain
 # documented source files. You may enter file names like myfile.cpp or
 # directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
+# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
 # Note: If this tag is empty the current directory is searched.
 
 INPUT                  = ./ \
-                         ./arch/Template
+                         ./arch/Template \
+                         ./utility/Template
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
@@ -783,12 +791,17 @@ INPUT_ENCODING         = UTF-8
 
 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
+# *.h) to filter out the source-files in the directories.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# read by doxygen.
+#
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
+# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
+# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
+# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd,
+# *.vhdl, *.ucf, *.qsf, *.as and *.js.
 
 FILE_PATTERNS          = *.c \
                          *.cc \
@@ -1206,8 +1219,9 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
 # page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
+# to YES can help to show when doxygen was last run and thus if the
+# documentation is up to date.
+# The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
 HTML_TIMESTAMP         = YES
@@ -1681,9 +1695,12 @@ COMPACT_LATEX          = NO
 PAPER_TYPE             = a4
 
 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
+# that should be included in the LaTeX output. The package can be specified just
+# by its name or with the correct syntax as to be used with the LaTeX
+# \usepackage command. To get the times font for instance you can specify :
+# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
+# To use the option intlimits with the amsmath package you can specify:
+# EXTRA_PACKAGES=[intlimits]{amsmath}
 # If left blank no extra packages will be included.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -2284,7 +2301,8 @@ INCLUDED_BY_GRAPH      = YES
 #
 # Note that enabling this option will significantly increase the time of a run.
 # So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
+# functions only using the \callgraph command. Disabling a call graph can be
+# accomplished by means of the command \hidecallgraph.
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2295,7 +2313,8 @@ CALL_GRAPH             = NO
 #
 # Note that enabling this option will significantly increase the time of a run.
 # So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
+# functions only using the \callergraph command. Disabling a caller graph can be
+# accomplished by means of the command \hidecallergraph.
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2318,11 +2337,15 @@ GRAPHICAL_HIERARCHY    = YES
 DIRECTORY_GRAPH        = YES
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
+# generated by dot. For an explanation of the image formats see the section
+# output formats in the documentation of the dot tool (Graphviz (see:
+# http://www.graphviz.org/)).
 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
 # to make the SVG files visible in IE 9+ (other browsers do not have this
 # requirement).
-# Possible values are: png, jpg, gif and svg.
+# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
+# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
+# png:gdiplus:gdiplus.
 # The default value is: png.
 # This tag requires that the tag HAVE_DOT is set to YES.
 

RF24.cpp

@@ -566,17 +566,10 @@ void RF24::printDetails(void)
   print_byte_register(PSTR("CONFIG\t"),CONFIG);
   print_byte_register(PSTR("DYNPD/FEATURE"),DYNPD,2);
 
-#if defined(__arm__) || defined (RF24_LINUX) || defined (__ARDUINO_X86__) || defined(LITTLEWIRE) || defined (RF24_BBB)
-  printf_P(PSTR("Data Rate\t = %s\r\n"),pgm_read_word(&rf24_datarate_e_str_P[getDataRate()]));
-  printf_P(PSTR("Model\t\t = %s\r\n"),pgm_read_word(&rf24_model_e_str_P[isPVariant()]));
-  printf_P(PSTR("CRC Length\t = %s\r\n"),pgm_read_word(&rf24_crclength_e_str_P[getCRCLength()]));
-  printf_P(PSTR("PA Power\t = %s\r\n"),  pgm_read_word(&rf24_pa_dbm_e_str_P[getPALevel()]));
-#else
-  printf_P(PSTR("Data Rate\t = %S\r\n"), pgm_read_word(&rf24_datarate_e_str_P[getDataRate()]));
-  printf_P(PSTR("Model\t\t = %S\r\n"),   pgm_read_word(&rf24_model_e_str_P[isPVariant()]));
-  printf_P(PSTR("CRC Length\t = %S\r\n"),pgm_read_word(&rf24_crclength_e_str_P[getCRCLength()]));
-  printf_P(PSTR("PA Power\t = %S\r\n"),  pgm_read_word(&rf24_pa_dbm_e_str_P[getPALevel()]));
-#endif
+  printf_P(PSTR("Data Rate\t = "PRIPSTR"\r\n"),pgm_read_word(&rf24_datarate_e_str_P[getDataRate()]));
+  printf_P(PSTR("Model\t\t = "PRIPSTR"\r\n"),pgm_read_word(&rf24_model_e_str_P[isPVariant()]));
+  printf_P(PSTR("CRC Length\t = "PRIPSTR"\r\n"),pgm_read_word(&rf24_crclength_e_str_P[getCRCLength()]));
+  printf_P(PSTR("PA Power\t = "PRIPSTR"\r\n"),  pgm_read_word(&rf24_pa_dbm_e_str_P[getPALevel()]));
 
 }
 

RF24_config.h

@@ -115,17 +115,17 @@
 // Progmem is Arduino-specific
 // Arduino DUE is arm and does not include avr/pgmspace
 #if defined (ARDUINO_ARCH_ESP8266)
-  #include <pgmspace.h>  
-  
-  typedef uint16_t prog_uint16_t;
+
   #define PSTR(x) (x)
+  #define printf Serial.printf
+  #define sprintf(...) os_sprintf( __VA_ARGS__ )
   #define printf_P printf
   #define strlen_P strlen  
   #define PROGMEM
   #define pgm_read_byte(addr) (*(const unsigned char *)(addr))
   #define pgm_read_word(p) (*(p))
   #define PRIPSTR "%s"
-  
+
 #elif defined(ARDUINO) && ! defined(__arm__) && !defined (__ARDUINO_X86__)
 	#include <avr/pgmspace.h>
 	#define PRIPSTR "%S"

library.properties

 name=RF24
-version=1.1.2
+version=1.1.3
 author=TMRh20
 maintainer=TMRh20
 sentence=A library for NRF24L01(+) communication.