Attempt to correct markdown formatting in readme

RPi/pyRF24/readme.md

@@ -3,22 +3,30 @@
 Installation:  
   
 1. Install the boost libraries:  
-    sudo apt-get install libboost1.50-all
+  
+    sudo apt-get install libboost1.50-all  
+  
 2. Build the library:  
-    ./setup.py build
+  
+    ./setup.py build  
+  
 3. Install the library:install:  
-    sudo ./setup.py install
+  
+    ./setup.py install  
+  
 	
-
-See https://github.com/TMRh20/RF24#connection-info for information on connecting your hardware
-See the included example for usage information. ( https://github.com/TMRh20/RF24/tree/master/examples_RPi )
-
-Running the Example:
-
-1. Edit the pingpair_dyn.py example to configure the appropriate pins per the above documentation:
-    Note: Refer to http://www.airspayce.com/mikem/bcm2835/group__constants.html#ga63c029bd6500167152db4e57736d0939 for RPi version specific pin information
+See https://github.com/TMRh20/RF24#connection-info for information on connecting your hardware  
+See the included example for usage information. ( https://github.com/TMRh20/RF24/tree/master/examples_RPi )  
+  
+Running the Example:  
+  
+1. Edit the pingpair_dyn.py example to configure the appropriate pins per the above documentation:  
+    Note: Refer to http://www.airspayce.com/mikem/bcm2835/group__constants.html#ga63c029bd6500167152db4e57736d0939 for RPi version specific pin information  
+  
     nano pingpair_dyn.py
-2. Configure another device, Arduino or RPi with the pingpair_dyn example
-3. Run the example
-    sudo ./pingpair_dyn.py
-
+  
+2. Configure another device, Arduino or RPi with the pingpair_dyn example  
+3. Run the example  
+  
+    sudo ./pingpair_dyn.py  
+