Add support for pluggable discovery

boards.txt

@@ -6,8 +6,13 @@ uno2018.name=Arduino Uno WiFi Rev2
 
 uno2018.vid.0=0x03eb
 uno2018.pid.0=0x2145
+uno2018.upload_port.0.vid=0x03eb
+uno2018.upload_port.0.pid=0x2145
+uno2018.upload_port.1.board=uno2018
 
 uno2018.upload.tool=avrdude
+uno2018.upload.tool.default=avrdude
+uno2018.upload.tool.network=arduino_ota
 uno2018.upload.protocol=xplainedmini_updi
 uno2018.upload.maximum_size=48640
 uno2018.upload.maximum_data_size=6144
@@ -25,6 +30,7 @@ uno2018.build.extra_flags={build.328emulation} -DMILLIS_USE_TIMERB3
 #uno2018.build.extra_flags=-B{runtime.tools.atpack.path}/gcc/dev/{build.mcu}
 
 uno2018.bootloader.tool=avrdude
+uno2018.bootloader.tool.default=avrdude
 uno2018.bootloader.file=atmega4809_uart_bl.hex
 uno2018.bootloader.SYSCFG0=0xC9
 uno2018.bootloader.BOOTEND=0x02
@@ -43,8 +49,13 @@ nona4809.name=Arduino Nano Every
 
 nona4809.vid.0=0x2341
 nona4809.pid.0=0x0058
+nona4809.upload_port.0.vid=0x2341
+nona4809.upload_port.0.pid=0x0058
+nona4809.upload_port.1.board=nona4809
 
 nona4809.upload.tool=avrdude
+nona4809.upload.tool.default=avrdude
+nona4809.upload.tool.network=arduino_ota
 nona4809.upload.protocol=jtag2updi
 nona4809.upload.maximum_size=49152
 nona4809.upload.maximum_data_size=6144
@@ -62,6 +73,7 @@ nona4809.build.extra_flags={build.328emulation} -DMILLIS_USE_TIMERB3 -DNO_EXTERN
 #nona4809.build.extra_flags=-B{runtime.tools.atpack.path}/gcc/dev/{build.mcu}
 
 nona4809.bootloader.tool=avrdude
+nona4809.bootloader.tool.default=avrdude
 nona4809.bootloader.file=atmega4809_uart_bl.hex
 nona4809.bootloader.SYSCFG0=0xC9
 nona4809.bootloader.BOOTEND=0x00

platform.txt

@@ -91,6 +91,12 @@ recipe.preproc.includes="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags}
 preproc.macros.flags=-w -x c++ -E -CC
 recipe.preproc.macros="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} {preproc.macros.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} "-I{build.core.path}/api/deprecated" {includes} "{source_file}" -o "{preprocessed_file_path}"
 
+# Required discoveries and monitors
+# ---------------------------------
+pluggable_discovery.required.0=builtin:serial-discovery
+pluggable_discovery.required.1=builtin:mdns-discovery
+pluggable_monitor.required.serial=builtin:serial-monitor
+
 # AVR Uploader/Programmers tools
 # ------------------------------
 
@@ -98,8 +104,6 @@ tools.avrdude.path={runtime.tools.avrdude-6.3.0-arduino17.path}
 tools.avrdude.cmd.path={path}/bin/avrdude
 tools.avrdude.config.path={path}/etc/avrdude.conf
 
-tools.avrdude.network_cmd={runtime.tools.arduinoOTA-1.3.0.path}/bin/arduinoOTA
-
 tools.avrdude.upload.params.verbose=-v
 tools.avrdude.upload.params.quiet=-q -q
 # tools.avrdude.upload.verify is needed for backwards compatibility with IDE 1.6.8 or older, IDE 1.6.9 or newer overrides this value
@@ -124,7 +128,14 @@ tools.avrdude.bootloader.pattern="{cmd.path}" "-C{config.path}" {bootloader.verb
 
 tools.avrdude_remote.upload.pattern=/usr/bin/run-avrdude /tmp/sketch.hex {upload.verbose} -p{build.mcu}
 
-tools.avrdude.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -d -v
+# this is deprecated by pluggable discovery:
+tools.avrdude.upload.network_pattern="{tools.arduino_ota.cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -d -v
+
+# ArduinoOTA
+tools.arduino_ota.cmd={runtime.tools.arduinoOTA-1.3.0.path}/bin/arduinoOTA
+tools.arduino_ota.upload.field.password=Password
+tools.arduino_ota.upload.field.password.secret=true
+tools.arduino_ota.upload.pattern="{tools.arduino_ota.cmd}" -address {upload.port.address} -port 65280 -username arduino -password "{upload.field.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -d -v
 
 # USB Default Flags
 # Default blank usb manufacturer will be filled in at compile time

programmers.txt

@@ -3,4 +3,5 @@ medbg.communication=usb
 medbg.protocol=xplainedmini_updi
 medbg.program.protocol=xplainedmini_updi
 medbg.program.tool=avrdude
-medbg.program.extra_params=-Pusb
\ No newline at end of file
+medbg.program.tool.default=avrdude
+medbg.program.extra_params=-Pusb