Skip to content

GitLab

D
duo-buildroot-sdk
Commit df3ba8d3 authored by sam.xiang's avatar sam.xiang Committed by forum_service
Browse files
Options

build: weekly update 2023-05-22 1. support some sensor 2. support rtl... 

build: weekly update 2023-05-22 1. support some sensor 2. support rtl bluetooth in huashanpai 3. set some board: CONFIG_MTD_UBI=y

Change-Id: I78fcb9c924fe90efda6df4364662dd6b0f19185b
parent 8e0360d8
Expand all Show whitespace changes
Inline Side-by-side
Showing with 751 additions and 14 deletions
build/boards/cv180x/cv1800b_sophpi_duo_sd/cv1800b_sophpi_duo_sd_defconfig
View file @ df3ba8d3
......@@ -20,7 +20,6 @@ CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_LZMA=y
CONFIG_SKIP_RAMDISK=y
# CONFIG_BUILDROOT_FS is not set
# CONFIG_ROOTFS_OVERLAYFS is not set
# CONFIG_TARGET_PACKAGE_CVITRACER is not set
# CONFIG_TARGET_PACKAGE_GDBSERVER is not set
......
build/boards/cv180x/cv1800b_wdmb_0008a_spinor/linux/cvitek_cv1800b_wdmb_0008a_spinor_rls_defconfig
View file @ df3ba8d3
......@@ -58,7 +58,7 @@ CONFIG_MTD_NAND_CVSNFC=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
CONFIG_SPI_CVI_SPIF=y
CONFIG_MTD_UBI=n
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
......
build/boards/cv181x/cv1811c_wevb_0006a_emmc/config.json 0 → 100644
View file @ df3ba8d3
{
"ddr_cfg_list": [
"",
"ddr3_1866_x16",
"ddr3_2133_x16",
"ddr_auto_x16"
],
"board_information": "C906B + EMMC 8192MB + BGA SIP 128MB"
}
build/boards/cv181x/cv1811c_wevb_0006a_emmc/cv1811c_wevb_0006a_emmc_defconfig 0 → 100644
View file @ df3ba8d3
CONFIG_CHIP_cv1811c=y
CONFIG_BOARD_wevb_0006a_emmc=y
CONFIG_DDR_CFG_ddr3_1866_x16=y
CONFIG_ARCH="riscv"
CONFIG_CROSS_COMPILE="riscv64-unknown-linux-gnu-"
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KERNEL_ENTRY_HACK=y
CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
CONFIG_TOOLCHAIN_MUSL_RISCV64=y
CONFIG_FLASH_SIZE_SHRINK=y
CONFIG_BOOT_IMAGE_SINGLE_DTB=y
CONFIG_STORAGE_TYPE_emmc=y
CONFIG_SENSOR_GCORE_GC4653=y
CONFIG_SENSOR_SMS_SC3335=y
CONFIG_SENSOR_SMS_SC500AI=y
CONFIG_SENSOR_SONY_IMX307=y
CONFIG_SENSOR_SONY_IMX307_2L=y
CONFIG_SENSOR_SONY_IMX307_SLAVE=y
CONFIG_SENSOR_SONY_IMX327=y
CONFIG_SENSOR_SONY_IMX327_2L=y
CONFIG_SENSOR_SONY_IMX327_SLAVE=y
CONFIG_SENSOR_OV_OS04C10=y
CONFIG_SENSOR_OV_OS04A10=y
CONFIG_UBOOT_2021_10=y
CONFIG_KERNEL_SRC_5.10=y
CONFIG_KERNEL_LZMA=y
CONFIG_SKIP_RAMDISK=y
CONFIG_SENSOR_TUNING_PARAM_cv181x_src_gcore_gc4653=y
# CONFIG_ROOTFS_OVERLAYFS is not set
CONFIG_TARGET_PACKAGE_DROPBEAR=y
CONFIG_TARGET_PACKAGE_MTD-UTILS=y
# CONFIG_TARGET_PACKAGE_RSYSLOG is not set
CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
CONFIG_ENABLE_FREERTOS=y
CONFIG_ENABLE_RTOS_DUMP_PRINT=y
CONFIG_DUMP_PRINT_SZ_IDX=17
CONFIG_TARGET_PACKAGE_GATORD=n
CONFIG_TARGET_PACKAGE_NTP=y
CONFIG_TARGET_PACKAGE_WIFI=y
build/boards/cv181x/cv1811c_wevb_0006a_emmc/dts_riscv/cv1811c_wevb_0006a_emmc.dts 0 → 100644
View file @ df3ba8d3
/dts-v1/;
#include "cv181x_base_riscv.dtsi"
#include "cv181x_asic_qfn.dtsi"
#include "cv181x_asic_emmc.dtsi"
#include "cv181x_default_memmap.dtsi"
/ {
};
&emmc {
no-1-8-v;
};
build/boards/cv181x/cv1811c_wevb_0006a_emmc/memmap.py 0 → 100644
View file @ df3ba8d3
SIZE_1M = 0x100000
SIZE_1K = 1024
# Only attributes in class MemoryMap are generated to .h
class MemoryMap:
# No prefix "CVIMMAP_" for the items in _no_prefix[]
_no_prefix = [
"CONFIG_SYS_TEXT_BASE" # u-boot's CONFIG_SYS_TEXT_BASE is used without CPP.
]
DRAM_BASE = 0x80000000
DRAM_SIZE = 128 * SIZE_1M
# ==============
# C906L FreeRTOS
# ==============
FREERTOS_SIZE = 768 * SIZE_1K
# FreeRTOS is at the end of DRAM
FREERTOS_ADDR = DRAM_BASE + DRAM_SIZE - FREERTOS_SIZE
FSBL_C906L_START_ADDR = FREERTOS_ADDR
# ==============================
# OpenSBI | arm-trusted-firmware
# ==============================
# Monitor is at the begining of DRAM
MONITOR_ADDR = DRAM_BASE
ATF_SIZE = 512 * SIZE_1K
OPENSBI_SIZE = 512 * SIZE_1K
OPENSBI_FDT_ADDR = MONITOR_ADDR + OPENSBI_SIZE
# =========================
# memory@DRAM_BASE in .dts.
# =========================
# Ignore the area of FreeRTOS in u-boot and kernel
KERNEL_MEMORY_ADDR = DRAM_BASE
KERNEL_MEMORY_SIZE = DRAM_SIZE - FREERTOS_SIZE
# =================
# Multimedia buffer. Used by u-boot/kernel/FreeRTOS
# =================
ION_SIZE = 70 * SIZE_1M
H26X_BITSTREAM_SIZE = 2 * SIZE_1M
H26X_ENC_BUFF_SIZE = 0
ISP_MEM_BASE_SIZE = 20 * SIZE_1M
FREERTOS_RESERVED_ION_SIZE = H26X_BITSTREAM_SIZE + H26X_ENC_BUFF_SIZE + ISP_MEM_BASE_SIZE
# ION after FreeRTOS
ION_ADDR = FREERTOS_ADDR - ION_SIZE
# Buffers of the fast image are inside the ION buffer
H26X_BITSTREAM_ADDR = ION_ADDR
H26X_ENC_BUFF_ADDR = H26X_BITSTREAM_ADDR + H26X_BITSTREAM_SIZE
ISP_MEM_BASE_ADDR = H26X_ENC_BUFF_ADDR + H26X_ENC_BUFF_SIZE
assert ISP_MEM_BASE_ADDR + ISP_MEM_BASE_SIZE <= ION_ADDR + ION_SIZE
# Boot logo is after the ION buffer
# Framebuffer uses boot logo's reserved memory
BOOTLOGO_SIZE = 1800 * SIZE_1K
BOOTLOGO_ADDR = ION_ADDR - BOOTLOGO_SIZE
FRAMEBUFFER_SIZE = BOOTLOGO_SIZE
FRAMEBUFFER_ADDR = BOOTLOGO_ADDR
# ===================
# FSBL and u-boot-2021
# ===================
CVI_UPDATE_HEADER_SIZE = SIZE_1K
UIMAG_SIZE = 16 * SIZE_1M
# kernel image loading buffer
UIMAG_ADDR = DRAM_BASE + 24 * SIZE_1M
CVI_UPDATE_HEADER_ADDR = UIMAG_ADDR - CVI_UPDATE_HEADER_SIZE
# FSBL decompress buffer
FSBL_UNZIP_ADDR = UIMAG_ADDR
FSBL_UNZIP_SIZE = UIMAG_SIZE
assert UIMAG_ADDR + UIMAG_SIZE <= BOOTLOGO_ADDR
# u-boot's run address and entry point
CONFIG_SYS_TEXT_BASE = DRAM_BASE + 2 * SIZE_1M
# u-boot's init stack point is only used before board_init_f()
CONFIG_SYS_INIT_SP_ADDR = UIMAG_ADDR + UIMAG_SIZE
build/boards/cv181x/cv1811c_wevb_0006a_emmc/partition/partition_emmc.xml 0 → 100644
View file @ df3ba8d3
<physical_partition type="emmc">
<partition label="BOOT" size_in_kb="8192" file="boot.emmc" />
<partition label="MISC" size_in_kb="512" file="logo.jpg" />
<!-- Beware that in emmc u-boot environment should be 0x40000 alignment -->
<partition label="ENV" size_in_kb="128" file="" />
<partition label="ROOTFS" size_in_kb="70656" file="rootfs.emmc" />
<partition label="SYSTEM" size_in_kb="40960" file="system.emmc" type="ext4" />
<partition label="CFG" size_in_kb="15240" file="cfg.emmc" mountpoint="/mnt/cfg" type="ext4" />
<partition label="DATA" size_in_kb="3145728" file="" mountpoint="/mnt/data" type="ext4"/>
</physical_partition>
build/boards/cv181x/cv1811c_wevb_0006a_emmc/rootfs_script/clean_rootfs.sh 0 → 100755
View file @ df3ba8d3
#!/bin/bash
SYSTEM_DIR=$1
rm -rf $SYSTEM_DIR/mnt/system/usr
rm -rf $SYSTEM_DIR/mnt/system/lib
rm -rf $SYSTEM_DIR/etc/init.d/S01syslogd
rm -rf $SYSTEM_DIR/etc/init.d/S02klogd
rm -rf $SYSTEM_DIR/etc/init.d/S02sysctl
rm -rf $SYSTEM_DIR/etc/init.d/S20urandom
rm -rf $SYSTEM_DIR/etc/init.d/S40network
rm -rf $SYSTEM_DIR/etc/init.d/S23ntp
rm -rf $SYSTEM_DIR/bin/ntpd
rm -rf $SYSTEM_DIR/mnt/cfg/secure.img
#del cv181x_mipi_tx.ko
rm -rf $SYSTEM_DIR/mnt/system/ko/cv181x_mipi_tx.ko
sed -i "/cv181x_mipi_tx.ko/d" $SYSTEM_DIR/mnt/system/ko/loadsystemko.sh
if [ $BUILD_FOR_DEBUG != "y" ]
then
#del dmesg cmd if CONFIG_PRINTK=n
#sed -i "/dmesg/d" $SYSTEM_DIR/mnt/system/ko/loadsystemko.sh
#del debugfs node
sed -i "/debugfs/d" $SYSTEM_DIR/etc/fstab
fi
du -sh $SYSTEM_DIR/* |sort -rh
build/boards/cv181x/cv1811c_wevb_0006a_emmc/u-boot/cvi_board_init.c 0 → 100644
View file @ df3ba8d3
int cvi_board_init(void)
{
PINMUX_CONFIG(IIC0_SCL, CV_SCL0__CR_4WTDI);
PINMUX_CONFIG(IIC0_SDA, CV_SDA0__CR_4WTDO);
PINMUX_CONFIG(PAD_MIPI_TXP1, IIC2_SCL);
PINMUX_CONFIG(PAD_MIPI_TXM1, IIC2_SDA);
PINMUX_CONFIG(PAD_MIPI_TXP0, XGPIOC_13);
PINMUX_CONFIG(PAD_MIPI_TXM0, CAM_MCLK1);
return 0;
}
build/boards/cv181x/cv1811c_wevb_0006a_emmc/u-boot/cvitek.h 0 → 100644
View file @ df3ba8d3
/*
*VO control GPIOs
*/
#define VO_GPIO_RESET_PORT portb
#define VO_GPIO_RESET_INDEX 5
#define VO_GPIO_RESET_ACTIVE GPIO_ACTIVE_LOW
#define VO_GPIO_PWM_PORT portb
#define VO_GPIO_PWM_INDEX 4
#define VO_GPIO_PWM_ACTIVE GPIO_ACTIVE_HIGH
#define VO_GPIO_POWER_CT_PORT portb
#define VO_GPIO_POWER_CT_INDEX 3
#define VO_GPIO_POWER_CT_ACTIVE GPIO_ACTIVE_HIGH
build/boards/cv181x/cv1811c_wevb_0006a_emmc/u-boot/cvitek_cv1811c_wevb_0006a_emmc_defconfig 0 → 100644
View file @ df3ba8d3
CONFIG_RISCV=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_DEVICE_TREE="cv181x_asic"
CONFIG_IDENT_STRING=" cvitek_cv181x"
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_TARGET_CVITEK_CV181X=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTDELAY=1
CONFIG_SYS_PROMPT="cv181x_c906# "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_LZMADEC is not set
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_ITEST is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_CVI_SD_UPDATE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_CVITEK=y
CONFIG_MTD=y
# CONFIG_PHY_SMSC is not set
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PHY_CVITEK=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_LZ4=y
CONFIG_LZMA=y
# CONFIG_TOOLS_LIBCRYPTO is not set
CONFIG_ENV_IS_IN_MMC=y
build/boards/cv181x/cv1811c_wevb_0006a_spinand/linux/cvitek_cv1811c_wevb_0006a_spinand_rls_defconfig
View file @ df3ba8d3
......@@ -65,6 +65,8 @@ CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CVSNFC=y
CONFIG_MTD_SPI_NOR=y
CONFIG_SPI_CVI_SPIF=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
......
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/cv1812h_wevb_0007a_emmc_huashan_defconfig
View file @ df3ba8d3
......@@ -2,7 +2,7 @@ CONFIG_CHIP_cv1812h=y
CONFIG_BOARD_wevb_0007a_emmc_huashan=y
CONFIG_DDR_CFG_ddr3_1866_x16=y
CONFIG_ARCH="riscv"
CONFIG_CROSS_COMPILE="riscv64-unknown-linux-gnu-"
CONFIG_CROSS_COMPILE="riscv64-unknown-linux-musl-"
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KERNEL_ENTRY_HACK=y
CONFIG_KERNEL_ENTRY_HACK_ADDR="0x80200000"
......@@ -41,11 +41,10 @@ CONFIG_TARGET_PACKAGE_BUSYBOX_SYSLOGD_SCRIPT=y
CONFIG_ENABLE_FREERTOS=y
CONFIG_ENABLE_RTOS_DUMP_PRINT=y
CONFIG_DUMP_PRINT_SZ_IDX=17
CONFIG_WIFI_ENABLE=y
CONFIG_WIFI_RTL8821CS=y
CONFIG_WIFI_RTL8723DS=y
CONFIG_TP_ENABLE=y
CONFIG_TP_GT9XX=y
CONFIG_TARGET_PACKAGE_ADBD=y
CONFIG_TARGET_PACKAGE_NTP=y
CONFIG_USB_OSDRV_CVITEK_GADGET=y
CONFIG_TARGET_PACKAGE_BT=y
CONFIG_CP_EXT_WIRELESS=y
\ No newline at end of file
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/linux/cvitek_cv1812h_wevb_0007a_emmc_huashan_defconfig
View file @ df3ba8d3
......@@ -640,7 +640,7 @@ CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_RTKH5=y
# CONFIG_BT_HCIUART_RTKH5=y
CONFIG_VIDEO_V4L2=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
......@@ -650,3 +650,14 @@ CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_BT_RTL=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_BT_HCIUART_SERDEV=n
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8821CS=m
CONFIG_RTL8723DS=m
build/boards/cv181x/cv1812h_wevb_0007a_emmc_huashan/u-boot/cvitek_cv1812h_wevb_0007a_emmc_huashan_defconfig
View file @ df3ba8d3
......@@ -34,7 +34,7 @@ CONFIG_MTD=y
# CONFIG_PHY_SMSC is not set
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PHY_CVITEK_CV182XA=y
CONFIG_PHY_CVITEK=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_LZ4=y
......
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/cv1812h_wevb_0007a_spinand_huashan_defconfig
View file @ df3ba8d3
......@@ -47,3 +47,5 @@ CONFIG_TP_GT9XX=y
CONFIG_TARGET_PACKAGE_ADBD=y
CONFIG_TARGET_PACKAGE_NTP=y
CONFIG_TARGET_PACKAGE_CRONTABS=y
CONFIG_USB_OSDRV_CVITEK_GADGET=y
CONFIG_TARGET_PACKAGE_BT=y
build/boards/cv181x/cv1812h_wevb_0007a_spinand_huashan/linux/cvitek_cv1812h_wevb_0007a_spinand_huashan_defconfig
View file @ df3ba8d3
......@@ -91,7 +91,7 @@ CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_CV182XCONFIG_CVITEK_PHYA_PHY=y
CONFIG_CVITEK_PHY=y
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
......
build/sensors/sensor_list.json
View file @ df3ba8d3
......@@ -2,6 +2,7 @@
"sensor_list": [
"BRIGATES_BG0808",
"GCORE_GC02M1",
"GCORE_GC0312",
"GCORE_GC0329",
"GCORE_GC1054",
"GCORE_GC2053",
......@@ -47,10 +48,14 @@
"SMS_SC3335",
"SMS_SC3335_SLAVE",
"SMS_SC3336",
"SMS_SC2331_1L",
"SMS_SC2335",
"SMS_SC2336",
"SMS_SC2336P",
"SMS_SC4210",
"SMS_SC4336",
"SMS_SC4336P",
"SMS_SC5336_2L",
"SMS_SC8238",
"SOI_F23",
"SOI_F35",
......@@ -60,6 +65,7 @@
"SOI_H65",
"SOI_K06",
"SOI_Q03",
"SOI_Q03P",
"SONY_IMX290_2L",
"SONY_IMX307",
"SONY_IMX307_2L",
......@@ -78,7 +84,8 @@
"TECHPOINT_TP2863",
"VIVO_MCS369",
"VIVO_MCS369Q",
"VIVO_MCS308M2"
"VIVO_MCS308M2",
"LONTIUM_LT6911"
],
"lens_list" : [
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment