Initial nRF51 and Bluz DK support

boards.txt

@@ -25,7 +25,7 @@ nRF52DK.upload.interface=jlink
 nRF52DK.upload.target=nrf51
 nRF52DK.upload.address=0x0
 nRF52DK.upload.maximum_size=524288
-nRF52DK.upload.setup_command=transport select swd
+nRF52DK.upload.setup_command=transport select swd;
 nRF52DK.upload.use_1200bps_touch=false
 nRF52DK.upload.wait_for_upload_port=false
 nRF52DK.upload.native_usb=false
@@ -36,5 +36,31 @@ nRF52DK.build.board=NRF52_DK
 nRF52DK.build.core=nRF5
 nRF52DK.build.variant=nRF52DK
 nRF52DK.build.variant_system_lib=
-nRF52DK.build.extra_flags=
+nRF52DK.build.extra_flags=-DNRF52
+nRF52DK.build.float_flags=-mfloat-abi=hard -mfpu=fpv4-sp-d16
 nRF52DK.build.ldscript=linker_scripts/gcc/nRF52DK.ld
+
+
+
+BluzDK.name=Bluz DK
+
+BluzDK.upload.tool=nRF5:openocd
+BluzDK.upload.protocol=
+BluzDK.upload.interface=jlink
+BluzDK.upload.target=nrf51
+BluzDK.upload.address=0x0
+BluzDK.upload.maximum_size=262144
+BluzDK.upload.setup_command=transport select swd; set WORKAREASIZE 0;
+BluzDK.upload.use_1200bps_touch=false
+BluzDK.upload.wait_for_upload_port=false
+BluzDK.upload.native_usb=false
+
+BluzDK.build.mcu=cortex-m0
+BluzDK.build.f_cpu=16000000
+BluzDK.build.board=BLUZ_DK
+BluzDK.build.core=nRF5
+BluzDK.build.variant=BluzDK
+BluzDK.build.variant_system_lib=
+BluzDK.build.extra_flags=-DNRF51
+BluzDK.build.float_flags=
+BluzDK.build.ldscript=linker_scripts/gcc/BluzDK.ld

cores/nRF5/nRF5_SDK_11/components/drivers_nrf/hal/nrf_saadc.c

@@ -15,6 +15,8 @@
  * @brief SAADC HAL implementation
  */
 
+#ifdef NRF52
+
 #include "nrf_saadc.h"
 
 void nrf_saadc_channel_init(uint8_t channel, nrf_saadc_channel_config_t const * const config)
@@ -29,3 +31,5 @@ void nrf_saadc_channel_init(uint8_t channel, nrf_saadc_channel_config_t const *
     nrf_saadc_channel_input_set(channel, config->pin_p, config->pin_n);
     return;
 }
+
+#endif

cores/nRF5/nRF5_SDK_11/components/toolchain/gcc/gcc_startup_nrf51.S

+/* Copyright (c) 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+    .syntax unified
+    .arch armv6-m
+
+    .section .stack
+    .align 3
+#ifdef __STACK_SIZE
+    .equ    Stack_Size, __STACK_SIZE
+#else
+    .equ    Stack_Size, 2048
+#endif
+    .globl __StackTop
+    .globl __StackLimit
+__StackLimit:
+    .space Stack_Size
+    .size __StackLimit, . - __StackLimit
+__StackTop:
+    .size __StackTop, . - __StackTop
+
+    .section .heap
+    .align 3
+#ifdef __HEAP_SIZE
+    .equ Heap_Size, __HEAP_SIZE
+#else
+    .equ    Heap_Size, 2048
+#endif
+    .globl __HeapBase
+    .globl __HeapLimit
+__HeapBase:
+    .if Heap_Size
+    .space Heap_Size
+    .endif
+    .size __HeapBase, . - __HeapBase
+__HeapLimit:
+    .size __HeapLimit, . - __HeapLimit
+
+    .section .isr_vector
+    .align 2
+    .globl __isr_vector
+__isr_vector:
+    .long   __StackTop                  /* Top of Stack */
+    .long   Reset_Handler
+    .long   NMI_Handler
+    .long   HardFault_Handler
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   SVC_Handler
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   PendSV_Handler
+    .long   SysTick_Handler
+
+  /* External Interrupts */
+    .long   POWER_CLOCK_IRQHandler
+    .long   RADIO_IRQHandler
+    .long   UART0_IRQHandler
+    .long   SPI0_TWI0_IRQHandler
+    .long   SPI1_TWI1_IRQHandler
+    .long   0                           /*Reserved */
+    .long   GPIOTE_IRQHandler
+    .long   ADC_IRQHandler
+    .long   TIMER0_IRQHandler
+    .long   TIMER1_IRQHandler
+    .long   TIMER2_IRQHandler
+    .long   RTC0_IRQHandler
+    .long   TEMP_IRQHandler
+    .long   RNG_IRQHandler
+    .long   ECB_IRQHandler
+    .long   CCM_AAR_IRQHandler
+    .long   WDT_IRQHandler
+    .long   RTC1_IRQHandler
+    .long   QDEC_IRQHandler
+    .long   LPCOMP_IRQHandler
+    .long   SWI0_IRQHandler
+    .long   SWI1_IRQHandler
+    .long   SWI2_IRQHandler
+    .long   SWI3_IRQHandler
+    .long   SWI4_IRQHandler
+    .long   SWI5_IRQHandler
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+    .long   0                           /*Reserved */
+
+    .size __isr_vector, . - __isr_vector
+
+/* Reset Handler */
+
+    .equ    NRF_POWER_RAMON_ADDRESS,             0x40000524
+    .equ    NRF_POWER_RAMONB_ADDRESS,            0x40000554
+    .equ    NRF_POWER_RAMONx_RAMxON_ONMODE_Msk,  0x3
+
+    .text
+    .thumb
+    .thumb_func
+    .align 1
+    .globl Reset_Handler
+    .type Reset_Handler, %function
+Reset_Handler:
+
+    MOVS    R1, #NRF_POWER_RAMONx_RAMxON_ONMODE_Msk
+
+    LDR     R0, =NRF_POWER_RAMON_ADDRESS
+    LDR     R2, [R0]
+    ORRS    R2, R1
+    STR     R2, [R0]
+
+    LDR     R0, =NRF_POWER_RAMONB_ADDRESS
+    LDR     R2, [R0]
+    ORRS    R2, R1
+    STR     R2, [R0]
+
+/* Loop to copy data from read only memory to RAM.
+ * The ranges of copy from/to are specified by following symbols:
+ *      __etext: LMA of start of the section to copy from. Usually end of text
+ *      __data_start__: VMA of start of the section to copy to.
+ *      __bss_start__: VMA of end of the section to copy to. Normally __data_end__ is used, but by using __bss_start__
+ *                    the user can add their own initialized data section before BSS section with the INTERT AFTER command.
+ *
+ * All addresses must be aligned to 4 bytes boundary.
+ */
+    ldr r1, =__etext
+    ldr r2, =__data_start__
+    ldr r3, =__bss_start__
+
+    subs r3, r2
+    ble .L_loop1_done
+
+.L_loop1:
+    subs r3, #4
+    ldr r0, [r1,r3]
+    str r0, [r2,r3]
+    bgt .L_loop1
+
+.L_loop1_done:
+
+/* This part of work usually is done in C library startup code. Otherwise,
+ * define __STARTUP_CLEAR_BSS to enable it in this startup. This section
+ * clears the RAM where BSS data is located.
+ *
+ * The BSS section is specified by following symbols
+ *    __bss_start__: start of the BSS section.
+ *    __bss_end__: end of the BSS section.
+ *
+ * All addresses must be aligned to 4 bytes boundary.
+ */
+#ifdef __STARTUP_CLEAR_BSS
+    ldr r1, =__bss_start__
+    ldr r2, =__bss_end__
+
+    movs r0, 0
+
+    subs r2, r1
+    ble .L_loop3_done
+
+.L_loop3:
+    subs r2, #4
+    str r0, [r1, r2]
+    bgt .L_loop3
+
+.L_loop3_done:
+#endif /* __STARTUP_CLEAR_BSS */
+
+/* Execute SystemInit function. */
+    bl SystemInit
+
+/* Call _start function provided by libraries.
+ * If those libraries are not accessible, define __START as your entry point.
+ */
+#ifndef __START
+#define __START _start
+#endif
+    bl __START
+
+    .pool
+    .size   Reset_Handler,.-Reset_Handler
+
+    .section ".text"
+
+
+/* Dummy Exception Handlers (infinite loops which can be modified) */
+
+    .weak   NMI_Handler
+    .type   NMI_Handler, %function
+NMI_Handler:
+    b       .
+    .size   NMI_Handler, . - NMI_Handler
+
+
+    .weak   HardFault_Handler
+    .type   HardFault_Handler, %function
+HardFault_Handler:
+    b       .
+    .size   HardFault_Handler, . - HardFault_Handler
+
+
+    .weak   SVC_Handler
+    .type   SVC_Handler, %function
+SVC_Handler:
+    b       .
+    .size   SVC_Handler, . - SVC_Handler
+
+
+    .weak   PendSV_Handler
+    .type   PendSV_Handler, %function
+PendSV_Handler:
+    b       .
+    .size   PendSV_Handler, . - PendSV_Handler
+
+
+    .weak   SysTick_Handler
+    .type   SysTick_Handler, %function
+SysTick_Handler:
+    b       .
+    .size   SysTick_Handler, . - SysTick_Handler
+
+
+/* IRQ Handlers */
+
+    .globl  Default_Handler
+    .type   Default_Handler, %function
+Default_Handler:
+    b       .
+    .size   Default_Handler, . - Default_Handler
+
+    .macro  IRQ handler
+    .weak   \handler
+    .set    \handler, Default_Handler
+    .endm
+
+    IRQ  POWER_CLOCK_IRQHandler
+    IRQ  RADIO_IRQHandler
+    IRQ  UART0_IRQHandler
+    IRQ  SPI0_TWI0_IRQHandler
+    IRQ  SPI1_TWI1_IRQHandler
+    IRQ  GPIOTE_IRQHandler
+    IRQ  ADC_IRQHandler
+    IRQ  TIMER0_IRQHandler
+    IRQ  TIMER1_IRQHandler
+    IRQ  TIMER2_IRQHandler
+    IRQ  RTC0_IRQHandler
+    IRQ  TEMP_IRQHandler
+    IRQ  RNG_IRQHandler
+    IRQ  ECB_IRQHandler
+    IRQ  CCM_AAR_IRQHandler
+    IRQ  WDT_IRQHandler
+    IRQ  RTC1_IRQHandler
+    IRQ  QDEC_IRQHandler
+    IRQ  LPCOMP_IRQHandler
+    IRQ  SWI0_IRQHandler
+    IRQ  SWI1_IRQHandler
+    IRQ  SWI2_IRQHandler
+    IRQ  SWI3_IRQHandler
+    IRQ  SWI4_IRQHandler
+    IRQ  SWI5_IRQHandler
+
+  .end

cores/nRF5/nRF5_SDK_11/components/toolchain/system_nrf51.c

+/* Copyright (c) 2015, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ *   * Redistributions of source code must retain the above copyright notice, this
+ *     list of conditions and the following disclaimer.
+ *
+ *   * Redistributions in binary form must reproduce the above copyright notice,
+ *     this list of conditions and the following disclaimer in the documentation
+ *     and/or other materials provided with the distribution.
+ *
+ *   * Neither the name of Nordic Semiconductor ASA nor the names of its
+ *     contributors may be used to endorse or promote products derived from
+ *     this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifdef NRF51
+
+/* NOTE: Template files (including this one) are application specific and therefore expected to
+   be copied into the application project folder prior to its use! */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nrf.h"
+#include "system_nrf51.h"
+
+/*lint ++flb "Enter library region" */
+
+
+#define __SYSTEM_CLOCK      (16000000UL)     /*!< nRF51 devices use a fixed System Clock Frequency of 16MHz */
+
+static bool is_manual_peripheral_setup_needed(void);
+static bool is_disabled_in_debug_needed(void);
+static bool is_peripheral_domain_setup_needed(void);
+
+
+#if defined ( __CC_ARM )
+    uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK;
+#elif defined ( __ICCARM__ )
+    __root uint32_t SystemCoreClock = __SYSTEM_CLOCK;
+#elif defined   ( __GNUC__ )
+    uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK;
+#endif
+
+void SystemCoreClockUpdate(void)
+{
+    SystemCoreClock = __SYSTEM_CLOCK;
+}
+
+void SystemInit(void)
+{
+    /* If desired, switch off the unused RAM to lower consumption by the use of RAMON register.
+       It can also be done in the application main() function. */
+
+    /* Prepare the peripherals for use as indicated by the PAN 26 "System: Manual setup is required
+       to enable the use of peripherals" found at Product Anomaly document for your device found at
+       https://www.nordicsemi.com/. The side effect of executing these instructions in the devices
+       that do not need it is that the new peripherals in the second generation devices (LPCOMP for
+       example) will not be available. */
+    if (is_manual_peripheral_setup_needed())
+    {
+        *(uint32_t volatile *)0x40000504 = 0xC007FFDF;
+        *(uint32_t volatile *)0x40006C18 = 0x00008000;
+    }
+
+    /* Disable PROTENSET registers under debug, as indicated by PAN 59 "MPU: Reset value of DISABLEINDEBUG
+       register is incorrect" found at Product Anomaly document for your device found at
+       https://www.nordicsemi.com/. There is no side effect of using these instruction if not needed. */
+    if (is_disabled_in_debug_needed())
+    {
+        NRF_MPU->DISABLEINDEBUG = MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos;
+    }
+
+    /* Execute the following code to eliminate excessive current in sleep mode with RAM retention in nRF51802 devices,
+       as indicated by PAN 76 "System: Excessive current in sleep mode with retention" found at Product Anomaly document
+       for your device found at https://www.nordicsemi.com/. */
+    if (is_peripheral_domain_setup_needed()){
+        if (*(uint32_t volatile *)0x4006EC00 != 1){
+            *(uint32_t volatile *)0x4006EC00 = 0x9375;
+            while (*(uint32_t volatile *)0x4006EC00 != 1){
+            }
+        }
+        *(uint32_t volatile *)0x4006EC14 = 0xC0;
+    }
+}
+
+
+static bool is_manual_peripheral_setup_needed(void)
+{
+    if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x1) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0))
+    {
+        if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x00) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+        {
+            return true;
+        }
+        if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x10) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+        {
+            return true;
+        }
+        if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+        {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+static bool is_disabled_in_debug_needed(void)
+{
+    if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x1) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0))
+    {
+        if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x40) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+        {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+static bool is_peripheral_domain_setup_needed(void)
+{
+    if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x1) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0))
+    {
+        if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0xA0) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+        {
+            return true;
+        }
+        if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0xD0) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+        {
+            return true;
+        }
+    }
+
+    return false;
+}
+
+/*lint --flb "Leave library region" */
+
+#endif

cores/nRF5/nRF5_SDK_11/components/toolchain/system_nrf51.h

+/* Copyright (c) 2015, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ *   * Redistributions of source code must retain the above copyright notice, this
+ *     list of conditions and the following disclaimer.
+ *
+ *   * Redistributions in binary form must reproduce the above copyright notice,
+ *     this list of conditions and the following disclaimer in the documentation
+ *     and/or other materials provided with the distribution.
+ *
+ *   * Neither the name of Nordic Semiconductor ASA nor the names of its
+ *     contributors may be used to endorse or promote products derived from
+ *     this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef SYSTEM_NRF51_H
+#define SYSTEM_NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+
+extern uint32_t SystemCoreClock;    /*!< System Clock Frequency (Core Clock)  */
+
+/**
+ * Initialize the system
+ *
+ * @param  none
+ * @return none
+ *
+ * @brief  Setup the microcontroller system.
+ *         Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param  none
+ * @return none
+ *
+ * @brief  Updates the SystemCoreClock with current core Clock 
+ *         retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_NRF51_H */

cores/nRF5/nRF5_SDK_11/components/toolchain/system_nrf52.c

@@ -28,6 +28,8 @@
  *
  */
 
+#ifdef NRF52
+
 #include <stdint.h>
 #include <stdbool.h>
 #include "nrf.h"
@@ -299,3 +301,5 @@ static bool errata_66(void)
 
 
 /*lint --flb "Leave library region" */
+
+#endif

cores/nRF5/wiring_analog_nRF51.c

+/*
+  Copyright (c) 2014 Arduino LLC.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifdef NRF51
+
+#include "Arduino.h"
+#include "wiring_private.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static int readResolution = 10;
+static int writeResolution = 8;
+
+void analogReadResolution( int res )
+{
+  readResolution = res;
+}
+
+void analogWriteResolution( int res )
+{
+  writeResolution = res;
+}
+
+static inline uint32_t mapResolution( uint32_t value, uint32_t from, uint32_t to )
+{
+  if ( from == to )
+  {
+    return value ;
+  }
+
+  if ( from > to )
+  {
+    return value >> (from-to) ;
+  }
+  else
+  {
+    return value << (to-from) ;
+  }
+}
+
+/*
+ * Internal Reference is at 1.0v
+ * External Reference should be between 1v and VDDANA-0.6v=2.7v
+ *
+ * Warning : On Arduino Zero board the input/output voltage for SAMD21G18 is 3.3 volts maximum
+ */
+void analogReference( eAnalogReference ulMode )
+{
+  return 0;
+}
+
+// Right now, PWM output only works on the pins with
+// hardware support.  These are defined in the appropriate
+// pins_*.c file.  For the rest of the pins, we default
+// to digital output.
+void analogWrite( uint32_t ulPin, uint32_t ulValue )
+{
+
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

cores/nRF5/wiring_analog.c → cores/nRF5/wiring_analog_nRF52.c

@@ -16,6 +16,8 @@
   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */
 
+#ifdef NRF52
+
 #include "nrf_saadc.h"
 #include "nrf_pwm.h"
 
@@ -233,3 +235,5 @@ void analogWrite( uint32_t ulPin, uint32_t ulValue )
 #ifdef __cplusplus
 }
 #endif
+
+#endif

platform.txt

@@ -28,20 +28,20 @@ compiler.warning_flags.all=-Wall -Wextra
 
 compiler.path={runtime.tools.gcc-arm-none-eabi-5_2-2015q4.path}/bin/
 compiler.c.cmd=arm-none-eabi-gcc
-compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -mfloat-abi=hard -mfpu=fpv4-sp-d16 -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
+compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} {build.float_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
 compiler.c.elf.cmd=arm-none-eabi-gcc
 compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps
 compiler.S.cmd=arm-none-eabi-gcc
 compiler.S.flags=-c -g -x assembler-with-cpp
 compiler.cpp.cmd=arm-none-eabi-g++
-compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -mfloat-abi=hard -mfpu=fpv4-sp-d16 -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
+compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} {build.float_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
 compiler.ar.cmd=arm-none-eabi-ar
 compiler.ar.flags=rcs
 compiler.objcopy.cmd=arm-none-eabi-objcopy
 compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
 compiler.elf2hex.flags=-O binary
 compiler.elf2hex.cmd=arm-none-eabi-objcopy
-compiler.ldflags=-mcpu={build.mcu} -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
+compiler.ldflags=-mcpu={build.mcu} -mthumb {build.float_flags} -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
 compiler.size.cmd=arm-none-eabi-size
 compiler.define=-DARDUINO=
 
@@ -50,7 +50,7 @@ build.extra_flags=
 
 nrf.sdk.path={runtime.platform.path}/cores/nRF5/nRF5_SDK_11
 
-compiler.nrf.flags=-DNRF52 "-I{nrf.sdk.path}/components/toolchain/" "-I{nrf.sdk.path}/components/toolchain/CMSIS/Include" "-I{nrf.sdk.path}/components/toolchain/gcc/" "-I{nrf.sdk.path}/components/drivers_nrf/hal/" "-I{nrf.sdk.path}/components/device/"
+compiler.nrf.flags="-I{nrf.sdk.path}/components/toolchain/" "-I{nrf.sdk.path}/components/toolchain/CMSIS/Include" "-I{nrf.sdk.path}/components/toolchain/gcc/" "-I{nrf.sdk.path}/components/drivers_nrf/hal/" "-I{nrf.sdk.path}/components/device/"
 
 # These can be overridden in platform.local.txt
 compiler.c.extra_flags={compiler.nrf.flags}

variants/BluzDK/linker_scripts/gcc/BluzDK.ld

+/* Linker script to configure memory regions. */
+
+SEARCH_DIR(.)
+GROUP(-lgcc -lc -lnosys)
+
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x40000
+  RAM (rwx) :  ORIGIN = 0x20000000, LENGTH = 0x8000
+}
+
+INCLUDE "nrf5x_common.ld"

variants/BluzDK/pins_arduino.h

+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+// API compatibility
+#include "variant.h"

variants/BluzDK/variant.cpp

+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+  // D0 - D7
+  21,
+  22,
+  23,
+  24,
+  25,
+  28,
+  29,
+  30,
+
+  // ??
+  // ??
+
+  // A0 - A7
+  6,
+  5,
+  4,
+  3,
+  2,
+  1,
+  0,
+  13,
+
+  // RX, TX
+  12,
+  8,
+
+  // SS1, MOSI1, MISO1, SCK1
+  15,
+  9,
+  14,
+  10,
+
+  // BTN
+  7,
+
+  // RBG
+  19,
+  18,
+  17
+};
+
+Uart Serial( NRF_UART0, UART0_IRQn, PIN_SERIAL_RX, PIN_SERIAL_TX );
+
+extern "C"
+{
+  void UART0_IRQHandler()
+  {
+    Serial.IrqHandler();
+  }
+}

variants/BluzDK/variant.h

+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_BLUZ_DK_
+#define _VARIANT_BLUZ_DK_
+
+/** Master clock frequency */
+#define VARIANT_MCK       (16000000ul)
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+#include "Uart.h"
+#endif // __cplusplus
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT           (26u)
+#define NUM_DIGITAL_PINS     (20u)
+#define NUM_ANALOG_INPUTS    (6u)
+#define NUM_ANALOG_OUTPUTS   (0u)
+
+// LEDs
+#define PIN_LED                 (7)
+#define PIN_LEDR                (23)
+#define PIN_LEDG                (24)
+#define PIN_LEDB                (25)
+#define LED_BUILTIN             PIN_LED
+
+// Buttons
+#define PIN_BUTTON              (22)
+
+/*
+ * Analog pins
+ */
+#define PIN_A0               (8)
+#define PIN_A1               (9)
+#define PIN_A2               (10)
+#define PIN_A3               (11)
+#define PIN_A4               (12)
+#define PIN_A5               (13)
+#define PIN_A6               (14)
+#define PIN_A7               (15)
+
+static const uint8_t A0  = PIN_A0 ;
+static const uint8_t A1  = PIN_A1 ;
+static const uint8_t A2  = PIN_A2 ;
+static const uint8_t A3  = PIN_A3 ;
+static const uint8_t A4  = PIN_A4 ;
+static const uint8_t A5  = PIN_A5 ;
+static const uint8_t A6  = PIN_A6 ;
+static const uint8_t A7  = PIN_A7 ;
+#define ADC_RESOLUTION    10
+
+/*
+ * Serial interfaces
+ */
+// Serial
+#define PIN_SERIAL_RX       (16)
+#define PIN_SERIAL_TX       (17)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO         (PIN_A4)
+#define PIN_SPI_MOSI         (PIN_A5)
+#define PIN_SPI_SCK          (PIN_A3)
+
+static const uint8_t SS   = PIN_A2 ;
+static const uint8_t MOSI = PIN_SPI_MOSI ;
+static const uint8_t MISO = PIN_SPI_MISO ;
+static const uint8_t SCK  = PIN_SPI_SCK ;
+
+#define PIN_SPI1_MISO         (19)
+#define PIN_SPI1_MOSI         (20)
+#define PIN_SPI1_SCK          (21)
+
+static const uint8_t SS1   = 18 ;
+static const uint8_t MOSI1 = PIN_SPI1_MOSI ;
+static const uint8_t MISO1 = PIN_SPI1_MISO ;
+static const uint8_t SCK1  = PIN_SPI1_SCK ;
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA         (0u)
+#define PIN_WIRE_SCL         (1u)
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+
+/*  =========================
+ *  ===== SERCOM DEFINITION
+ *  =========================
+*/
+
+extern Uart Serial;
+
+#endif
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR   Serial
+#define SERIAL_PORT_HARDWARE  Serial
+
+#endif