Skip to content

GitLab

A
arduino-cli
Unverified Commit d86bc138 authored by Cristian Maglie's avatar Cristian Maglie Committed by GitHub
Browse files
Options

[skip-changelog] Small change in upload message (#1991) 

* Renamed variables

* Do not print full Port structure on messages

This produce a more clean output and stabilizes tests.
parent b1dd623e
Hide whitespace changes
Inline Side-by-side
Showing with 67 additions and 67 deletions
commands/upload/upload.go
View file @ d86bc138
......@@ -396,10 +396,10 @@ func runProgramAction(pme *packagemanager.Explorer,
}
cb := &serialutils.ResetProgressCallbacks{
TouchingPort: func(port string) {
logrus.WithField("phase", "board reset").Infof("Performing 1200-bps touch reset on serial port %s", port)
TouchingPort: func(portAddress string) {
logrus.WithField("phase", "board reset").Infof("Performing 1200-bps touch reset on serial port %s", portAddress)
if verbose {
outStream.Write([]byte(fmt.Sprintln(tr("Performing 1200-bps touch reset on serial port %s", port))))
outStream.Write([]byte(fmt.Sprintln(tr("Performing 1200-bps touch reset on serial port %s", portAddress))))
}
},
WaitingForNewSerial: func() {
......@@ -408,17 +408,17 @@ func runProgramAction(pme *packagemanager.Explorer,
outStream.Write([]byte(fmt.Sprintln(tr("Waiting for upload port..."))))
}
},
BootloaderPortFound: func(port string) {
if port != "" {
logrus.WithField("phase", "board reset").Infof("Upload port found on %s", port)
BootloaderPortFound: func(portAddress string) {
if portAddress != "" {
logrus.WithField("phase", "board reset").Infof("Upload port found on %s", portAddress)
} else {
logrus.WithField("phase", "board reset").Infof("No upload port found, using %s as fallback", actualPort)
logrus.WithField("phase", "board reset").Infof("No upload port found, using %s as fallback", actualPort.Address)
}
if verbose {
if port != "" {
outStream.Write([]byte(fmt.Sprintln(tr("Upload port found on %s", port))))
if portAddress != "" {
outStream.Write([]byte(fmt.Sprintln(tr("Upload port found on %s", portAddress))))
} else {
outStream.Write([]byte(fmt.Sprintln(tr("No upload port found, using %s as fallback", actualPort))))
outStream.Write([]byte(fmt.Sprintln(tr("No upload port found, using %s as fallback", actualPort.Address))))
}
}
},
......@@ -427,11 +427,11 @@ func runProgramAction(pme *packagemanager.Explorer,
},
}
if newPort, err := serialutils.Reset(portToTouch, wait, cb, dryRun); err != nil {
if newPortAddress, err := serialutils.Reset(portToTouch, wait, cb, dryRun); err != nil {
outStream.Write([]byte(fmt.Sprintln(tr("Cannot perform port reset: %s", err))))
} else {
if newPort != "" {
actualPort.Address = newPort
if newPortAddress != "" {
actualPort.Address = newPortAddress
}
}
}
......
internal/integrationtest/upload_mock/upload_mock_test.go
View file @ d86bc138
......@@ -277,9 +277,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
},
},
{
......@@ -287,9 +287,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
},
},
{
......@@ -297,9 +297,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
},
},
{
......@@ -307,9 +307,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -V -patmega32u4 -cavr109 \"-P/dev/ttyACM0\" -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
},
},
{
......@@ -317,9 +317,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
},
},
{
......@@ -327,9 +327,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
},
},
{
......@@ -337,9 +337,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
},
},
{
......@@ -347,9 +347,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude\" \"-C{data_dir}/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf\" -v -patmega32u4 -cavr109 -P/dev/ttyACM0 -b57600 -D \"-Uflash:w:{build_dir}/{sketch_name}.ino.hex:i\"\n",
},
},
{
......@@ -377,9 +377,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -397,9 +397,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -417,9 +417,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -437,9 +437,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -I -U true -i -e -w \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -I -U true -i -e -w \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -I -U true -i -e -w \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -I -U true -i -e -w \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -I -U true -i -e -w \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -I -U true -i -e -w \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -457,9 +457,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -477,9 +477,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -497,9 +497,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -517,9 +517,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -537,9 +537,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......@@ -557,9 +557,9 @@ func TestUploadSketch(t *testing.T) {
UploadPort: "/dev/ttyACM0",
Programmer: "",
Output: map[string]string{
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using address:\"/dev/ttyACM0\" protocol:\"serial\" as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"darwin": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"linux": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
"win32": "Performing 1200-bps touch reset on serial port /dev/ttyACM0\nWaiting for upload port...\nNo upload port found, using /dev/ttyACM0 as fallback\n\"{data_dir}/packages/arduino/tools/bossac/1.7.0-arduino3/bossac.exe\" -i -d --port=ttyACM0 -U true -i -e -w -v \"{build_dir}/{sketch_name}.ino.bin\" -R\n",
},
},
{
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment