GitLab

UTFT8 encoded Unicode values were not being drawn on screen with versions after 2.4.1 of the ESP8266 core.

The backlight control pin and ON state can be defined in the setup.h
file. Addresses #229, #226, #221

Comments updated and ILI9488 warning added.

Speed up Sprite rotation on an ESP32
Update utf8 serial decoder to handle illegal format strings
Remove need for D0_USED_FOR_xx (issue #271)
Clean up setup files
Correct various comment typos

Sprites can be rendered rotated with defined pivot points, 3 new
examples have been added "Rotated_Sprite_1/2/3".
The FLASH bitmap example has been moved to the Generic examples folder.
Boundary checks have been added to pushImage()
A new scrolling and wrapping in a Sprite example has been added.

Added new function that sketch can call to convert raw ADC x and y
values to calibrated screen coordinates:
tft.convertRawXY(&x, &y);

Redunced required number of SPI transfers needed to read raw values.
Changed mode so PENIRQ pin is enabled so users sketch can read this
signal (if needed).

See issue #279.

Fixes warning/error that is only reported with certain compiler warning flag settings ("All" in Arduino IDE).

Fixed bug where wrong wodth was returned for 1bpp Sprite
Improved speed for copying a 1bpp Sprite into another 1bpp Sprite (
affects Sprite pushImage() function only)
Added option to setup for colour inversion

Not tested by Bodmer, tested by s60sc as in #238

Arduino library manager picked up the wrong release.

This version raise is to forece a new release to be recognised. Releases
1.3.2 and 1.3.3 have been deleted.

I fixed the parallel and broke the SPI, now both work!

Parallel compatibility lost during recent updates.
Now working again.

New example added: Sprite_scroll_1bit

Added notes about reading from the display.

Tested on ESP32 and ST7789V display only. It may not work with other
displays!

Use:
#define TFT_SDA_READ

in setup file to use bi-directional SDA pin support.

Tested on an ESP32 with ST7789V display
SDA read is very slow on an ESP8266 (to be investigated)
Added new setup #define TFT_SDA_READ
Add new ESP32 and ESP8266 compatible in example/Generic folder to test
capture of TFT screen

// For ST7789 ONLY, define the colour order IF the blue and red are
swapped on your display
//#define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
//#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red

Corner case caused missed graphics.

Remove legacy changes for double buffered SPI
Eliminate unecessary ESP32 SPI read/modify write
Eliminate two stage control bit changes (may impact some diplays with
setup/hold  timing and show ESP32 hardware register bug?)
Add single register write for CS and DC command
Make setAddrWindow smarter (as used in previous AVR library)
Improve compatibility with GFX sketches
Re-arrange comments slightly to improve positioning

ICST7735S red-tabbed 80x160 support