Skip to content

GitLab

T
TFT_eSPI
Commit fc8d912f authored by Bodmer's avatar Bodmer
Browse files
Options

Update Read_User_Setup.ino

parent 00ac1296
Show whitespace changes
Inline Side-by-side
Showing with 10 additions and 4 deletions
examples/Test and diagnostics/Read_User_Setup/Read_User_Setup.ino
View file @ fc8d912f
......@@ -73,9 +73,15 @@ if (user.r2_y_offset != 0) { Serial.print("R2 y offset = "); Serial.println(us
if (user.r3_x_offset != 0) { Serial.print("R3 x offset = "); Serial.println(user.r3_x_offset); }
if (user.r3_y_offset != 0) { Serial.print("R3 y offset = "); Serial.println(user.r3_y_offset); }
if (user.pin_tft_mosi != -1) { Serial.print("MOSI = "); Serial.print("GPIO "); Serial.print(getPinName(user.pin_tft_mosi)); Serial.println(user.pin_tft_mosi); }
if (user.pin_tft_miso != -1) { Serial.print("MISO = "); Serial.print("GPIO "); Serial.print(getPinName(user.pin_tft_miso)); Serial.println(user.pin_tft_miso); }
if (user.pin_tft_clk != -1) { Serial.print("SCK = "); Serial.print("GPIO "); Serial.print(getPinName(user.pin_tft_clk)); Serial.println(user.pin_tft_clk); }
#ifdef ESP32
if (user.pin_tft_mosi != -1) { Serial.print("MOSI = "); Serial.print("GPIO "); Serial.println(user.pin_tft_mosi); }
if (user.pin_tft_miso != -1) { Serial.print("MISO = "); Serial.print("GPIO "); Serial.println(user.pin_tft_miso); }
if (user.pin_tft_clk != -1) { Serial.print("SCK = "); Serial.print("GPIO "); Serial.println(user.pin_tft_clk); }
#else
if (user.pin_tft_mosi != -1) { Serial.print("MOSI = "); Serial.print("GPIO "); Serial.print(getPinName(user.pin_tft_mosi)); Serial.println(user.pin_tft_mosi); }
if (user.pin_tft_miso != -1) { Serial.print("MISO = "); Serial.print("GPIO "); Serial.print(getPinName(user.pin_tft_miso)); Serial.println(user.pin_tft_miso); }
if (user.pin_tft_clk != -1) { Serial.print("SCK = "); Serial.print("GPIO "); Serial.print(getPinName(user.pin_tft_clk)); Serial.println(user.pin_tft_clk); }
#endif
#ifdef ESP8266
if (user.overlap == true)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment