Fix #406

TFT_Drivers/ST7735_Rotation.h

@@ -84,8 +84,8 @@
        rowstart = 0;
      } else if(tabcolor == INITR_GREENTAB160x80) {
        writedata(TFT_MAD_BGR);
-       colstart = 0;
-       rowstart = 0;
+       colstart = 26;
+       rowstart = 1;
      } else if(tabcolor == INITR_REDTAB160x80) {
        writedata(TFT_MAD_BGR);
        colstart = 24;

User_Setups/Setup43_ST7735.h

@@ -11,7 +11,7 @@
 
 #define ST7735_GREENTAB160x80
 
-
+#ifdef ESP32
 #define TFT_MISO 19
 #define TFT_MOSI 23
 #define TFT_SCLK 18
@@ -19,7 +19,16 @@
 #define TFT_DC    2  // Data Command control pin
 #define TFT_RST   4  // Reset pin (could connect to RST pin)
 //#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
-
+#else
+// Display GND       to NodeMCU pin GND (0V)
+// Display VCC       to NodeMCU 5V or 3.3V
+// Display SCK       to NodeMCU pin D5
+// Display SDI/MOSI  to NodeMCU pin D7
+// Display BLK       to NodeMCU pin VIN
+#define TFT_CS   PIN_D8  // Chip select control pin D8
+#define TFT_DC   PIN_D3  // Data Command control pin
+#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+#endif
 
 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters