Merge pull request #1786 from dracir9/master

Fix problem in PR #1770

CMakeLists.txt

@@ -2,5 +2,3 @@
 idf_component_register(SRCS "TFT_eSPI.cpp"
                     INCLUDE_DIRS "."
                     PRIV_REQUIRES arduino)
\ No newline at end of file
-
-add_definitions(-DTFT_eSPI_COMPONENT)
\ No newline at end of file

Kconfig

 menu "TFT_eSPI"
 
+    menu "Hidden menu"
+        visible if false
+
+        config TFT_eSPI_ESPIDF
+            bool "Enable Configuration"
+            default y
+    endmenu
+        
     choice TFT_DRIVER
         prompt "Select TFT driver"
         default TFT_ILI9341_DRIVER
@@ -145,11 +153,12 @@ menu "TFT_eSPI"
     config TFT_PARALLEL_8_BIT
         bool "Enable 8-bit parallel mode (otherwise SPI is assumed)"
         default "n"
+        depends on IDF_TARGET_ESP32
         help
             Use 8-bit parallel bus to send data to the LCD. If not set SPI will be used.
     
     menu "Display Data pins"
-        visible if TFT_PARALLEL_8_BIT
+        depends on TFT_PARALLEL_8_BIT
         config TFT_D0
             int "Data 0 pin"
             default -1
@@ -202,11 +211,12 @@ menu "TFT_eSPI"
     endmenu
 
     menu "Display SPI config"
-        visible if !TFT_PARALLEL_8_BIT
+        depends on !TFT_PARALLEL_8_BIT
         config TFT_MISO
             int "TFT MISO pin"
             default -1
-            range -1 32
+            range -1 32 if IDF_TARGET_ESP32
+            range -1 45 if IDF_TARGET_ESP32S2
             help
                 Master In Slave Out pin.
                 Can be labelled as SDO in some displays
@@ -214,7 +224,8 @@ menu "TFT_eSPI"
         config TFT_MOSI
             int "TFT MOSI pin"
             default -1
-            range -1 32
+            range -1 32 if IDF_TARGET_ESP32
+            range -1 45 if IDF_TARGET_ESP32S2
             help
                 Master Out Slave In pin.
                 Can be labelled as SDA or SDI in some displays
@@ -222,7 +233,8 @@ menu "TFT_eSPI"
         config TFT_SCLK
             int "TFT Clock pin"
             default -1
-            range -1 32
+            range -1 32 if IDF_TARGET_ESP32
+            range -1 45 if IDF_TARGET_ESP32S2
             help
                 Labelled in some displays as WR
 
@@ -258,7 +270,8 @@ menu "TFT_eSPI"
         config TFT_CS
             int "TFT Chip Select pin"
             default -1
-            range -1 33
+            range -1 33 if IDF_TARGET_ESP32
+            range -1 45 if IDF_TARGET_ESP32S2
     
         config TFT_DC
             int "TFT Data/Command pin"
@@ -270,17 +283,22 @@ menu "TFT_eSPI"
         config TFT_RST
             int "TFT Reset pin"
             default -1
-            range -1 33
+            range -1 33 if IDF_TARGET_ESP32
+            range -1 45 if IDF_TARGET_ESP32S2
 
+        config ENABLE_BL
+            bool "Enable backlight control"
+            default y
+        
+        if ENABLE_BL
             config TFT_BL
                 int "TFT Backlight pin"
                 default -1
-            range -1 33
+                range -1 33 if IDF_TARGET_ESP32
+                range -1 45 if IDF_TARGET_ESP32S2
                 help
                     Pin for the backlight control signal
-                Set to -1 to disable
         
-        if TFT_BL >= 0
             choice TFT_BACKLIGHT_ON
                 bool "Pin state to activate backlight"
                 default TFT_BACKLIGHT_ON_HIGH
@@ -336,15 +354,22 @@ menu "TFT_eSPI"
     endmenu
     
     menu "Touch screen configuration"
+        config ENABLE_TOUCH
+            bool "Enable Touch"
+            default n
+
+        if ENABLE_TOUCH
             config TOUCH_CS
                 int "Touch chip select pin"
                 default -1
-            range -1 33
+                range -1 33 if IDF_TARGET_ESP32
+                range -1 45 if IDF_TARGET_ESP32S2
 
             config SPI_TOUCH_FREQUENCY
                 int "SPI frequency for XPT2046 chip (Hz)"
                 default 2500000
                 range 1 80000000
+        endif
     endmenu
 
 endmenu

TFT_config.h

@@ -12,7 +12,7 @@
  * @author Ricard Bitriá Ribes (https://github.com/dracir9)
  * Created Date: 22-01-2022
  * -----
- * Last Modified: 11-04-2022
+ * Last Modified: 14-04-2022
  * Modified By: Ricard Bitriá Ribes
  * -----
  * @copyright (c) 2022 Ricard Bitriá Ribes
@@ -143,8 +143,13 @@
 #endif
 
 // Backlight config
-#if CONFIG_TFT_BL != -1
+#ifdef CONFIG_ENABLE_BL
+    #if CONFIG_TFT_BL == -1
+        #error "Invalid backlight control pin. Check TFT_eSPI configuration"
+    #else
         #define TFT_BL      CONFIG_TFT_BL
+    #endif
+
     #define TFT_BACKLIGHT_ON CONFIG_TFT_BACKLIGHT_ON
 #endif
 
@@ -218,7 +223,6 @@
 
 // SPI BUS
 #else
-
     #if CONFIG_TFT_MISO == -1
         #error "Invalid MISO pin. Check TFT_eSPI configuration"
     #else
@@ -289,8 +293,14 @@
 **                         Section 5: Touchscreen configuration
 ***************************************************************************************/
 
-#define TOUCH_CS            CONFIG_TOUCH_CS
+#ifdef CONFIG_ENABLE_TOUCH
+    #if CONFIG_TOUCH_CS == -1
+        #error "Invalid Touch Chip Select pin. Check TFT_eSPI configuration"
+    #else
+        #define TOUCH_CS            CONFIG_TOUCH_CS
+    #endif
 
-#define SPI_TOUCH_FREQUENCY CONFIG_SPI_TOUCH_FREQUENCY
+    #define SPI_TOUCH_FREQUENCY CONFIG_SPI_TOUCH_FREQUENCY
+#endif
 
 #endif // TFT_CONFIG_H

TFT_eSPI.h

@@ -27,10 +27,6 @@
 ***************************************************************************************/
 
 //Standard support
-#ifdef TFT_eSPI_COMPONENT
-  #include "TFT_config.h"
-#endif
-
 #include <Arduino.h>
 #include <Print.h>
 #include <SPI.h>
@@ -40,6 +36,9 @@
 ***************************************************************************************/
 // Include header file that defines the fonts loaded, the TFT drivers
 // available and the pins to be used, etc, etc
+#ifdef CONFIG_TFT_eSPI_ESPIDF
+#include "TFT_config.h"
+#endif
 #include <User_Setup_Select.h>
 
 // Handle FLASH based storage e.g. PROGMEM