Add Setup47 for animated eyes

User_Setups/Setup47_ST7735.h

+// Config for two ST7735 128 x 128 displays for Animated_Eyes example
+
+#define ST7735_DRIVER     // Configure all registers
+
+#define TFT_WIDTH  128
+#define TFT_HEIGHT 128
+
+// #define ST7735_INITB
+// #define ST7735_GREENTAB
+// #define ST7735_GREENTAB2
+ #define ST7735_GREENTAB3
+// #define ST7735_GREENTAB128    // For 128 x 128 display
+// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
+// #define ST7735_REDTAB
+//#define ST7735_BLACKTAB
+// #define ST7735_REDTAB160x80   // For 160 x 80 display with 24 pixel offset
+
+//#define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+//#define TFT_INVERSION_ON
+//#define TFT_INVERSION_OFF
+
+// Generic ESP32 setup
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+//#define TFT_CS    21 // Not defined here, chip select is managed by sketch
+#define TFT_DC    2
+#define TFT_RST   4  // Connect reset to ensure display initialises
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+
+#define SPI_FREQUENCY  27000000
+//#define SPI_FREQUENCY  40000000
+
+#define SPI_READ_FREQUENCY  20000000
+
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// #define SUPPORT_TRANSACTIONS
\ No newline at end of file